Network Interface Card Question & Answers November 15, 2022 By WatElectronics This article lists 25 Network Interface Card MCQs for engineering students. All the Network Interface Card Questions & Answers given below include a hint and a link wherever possible to the relevant topic. This is helpful for users who are preparing for their exams, or interviews, or professionals who would like to brush up on the fundamentals of Network Interface Card. The network interface card provides an interface between the computer and the networking medium. It prepares, sends, and controls data flow across the network. Each network interface card has a unique hardware network address. The things that are important to consider when selecting NIC are the type of network, type of media, and type of system bus. The data transfer, buffering, encapsulation, MAC address storage, signal encoding, and decoding are the basic functions of network interface cards. The module transmitting and receiving, the module of encoding, and decoding are the functional parts of the network interface card. The module of transmitting and receiving consists of various circuits of signals with data. The module of encoding decoding generates and stores the sender and receiver addresses. The NIC has a unique identifier called a media access control address. The advantage of network interface cards is the communication speed used in gigabytes, highly reliable connection, bulk data can be shared among many users, and many peripheral devices can be connected using many ports of network interface cards. The disadvantage of NIC is inconvenient in the case of wired cable NIC, as it is not portable like a wireless router, the configuration should be proper for better communication, and the data is unsecured. The applications of network interface cards are applicable for wireless communication devices like firewalls, bridges, and repeaters and applicable for wired communication devices such as hubs, switches, routers, smartphones, etc. 1). What is the standard form of ISA? Indian Standard ARM Internal Standard Architecture Indian Standard Architecture None of the above None Hint 2). The maximum transfer rate of extended ISA bus is ________________ Mbps? 33 Mbps 264 Mbps 533 Mbps None of the above None Hint 3). Which one of the following works on a fibre optic cable network? Wireless network cards Copper wired network interface cards Fiber optic network interface card None of the above None Hint 4). Which one of the following is a component on NIC? Resistors Capacitors Diodes All of the above None Hint 5). What is the standard form of PCI-X? Peripheral Component Interconnect External Peripheral Component Interconnect Extended Peripheral Component Interface Embedded None of the above None Hint 6). The network interface card is categorized into ___________________ types? Two Three Four Five None Hint 7). Which one of the following is developed in 1973? 5 Base T 10 Base T 100 Base T None of the above None Hint 8). What is the standard form of ODI? Open Data interface Open Device Interface Open Datalink Interface None of the above None Hint 9). Which one of the following is also known as fast ethernet? 5 Base T 10 Base T 100 Base T None of the above None Hint 10). What is the standard form of NIC? National Interface Card National Internal Card Normal Interface Card None of the above None Hint Network Interface Card MCQ for Exams 11). Which one of the following generates and stores the sender and receiver address? Medium access module Module of encoding and decoding Module of transmitting and receiving None of the above None Hint 12). Which one of the following consists of various circuits of signals with data? Medium access module Module of encoding and decoding Module of transmitting and receiving None of the above None Hint 13). What is the standard form of WDM? Win32 Driver Model Win32 Device Model Win32 Driver Module None of the above None Hint 14). Which one of the following is developed in 1987? 5 Base T 10 Base T 100 Base T None of the above None Hint 15). What is the standard form of PCI-e? Peripheral Component Interconnect Express Peripheral Component Interconnect Extended Peripheral Component Interface Embedded None of the above None Hint 16). The maximum transfer rate of microchannel architecture bus type is ________________ Mbps? 33 Mbps 264 Mbps 533 Mbps None of the above None Hint 17). What is the standard form of NDIS? Network Device Interface Specification Network Device Internal Specification National Device Interface Specification None of the above None Hint 18). The ethernet network interface card is categorized into ___________________ types? Two Three Four Five None Hint 19). Which one of the following is also referred as 1000 Base T ethernet? 5 Base T 10 Base T 100 Base T Gigabit ethernet None Hint 20). What is the standard form of PCI? Peripheral Component Interconnect Peripheral Control Interconnect Peripheral Component Interface None of the above None Hint Network Interface Card MCQ for Interviews 21). What is the standard form of FDDI? Fiber Data Digital Interface Fiber Distributed Digital Interface Fiber Data Distributed Interface None of the above None Hint 22). Which one of the following is a basic function of network interface card? Data transfer Buffering Encapsulation All of the above None Hint 23). The maximum transfer rate of peripheral component interconnect bus type is ________________ Mbps? 33 Mbps 264 Mbps 533 Mbps None of the above None Hint 24). What is the standard form of MAC? Medium Access Module Medium Access Mode Medium Address Module None of the above None Hint 25). The data rate of fibre data digital interface is ________________ Mbps? 100 Mbps 1000 Mbps 200 Mbps 600 Mbps None Hint Read more about Network Interface Card Please fill in the comment box below. Time's up
